Log home kits

6. Gable ends (and dormer walls when applicable)

• 2×6 spruce framing – plates and studs
• Lintel material- as required
• Insulated wall sheathing – R4
• House wrap – air barrier
• 1×8 tongue & groove v-joint pine siding

7. Roof system

• Pre-engineered roof system
• Structural beams and support posts as required
• Truss bracing and In-fill framing as required
• Infill and blocking
• ½” OSB sheathing
• Ice and water shield for eaves, valleys & roof to wall junction
• Synthetic underlay membrane for balance of roof area
• BP Mystique shingles & Mont-Blanc capping
• Pre-finished steel flashings
• Roof vents
• 2×6 spruce sub-fascia

8. Soffit

• Pre-finished vented aluminum soffit
• Aluminum flat stock for drip flashings, transition flashings and soffit boxes
• Pre-finished 6” aluminum fascia
• J-trim
• Fasteners

9. Exterior trim

• 1×4 (sides & bottom) & 1×6 (top) window and door trim

10. Porch roof system (when applicable)

• Support posts & beam to deck level
• Dimensional spruce rafters or pre-engineered roof trusses
• Matching finish to main roof
• Pre-finished vented aluminum soffit (eaves and ceiling)
• 1×6 v-joint T&G pine for ceiling
• Steel transition/wall flashing as required

Note: deck materials not included

1. Main floor system

• Adjustable steel tele-posts
• Built up wood support beam
• 5-½” sill sealer gasket
• 2×6 pressure treated sill plate
• Wood I pre-engineered floor joist system
• 5/8″ t&g OSB sub-floor sheathing
• Builder’s shims

2. Perimeter wall system

• 5-1/2″ sill gasket
• 6”x10” white pine logs, machined double t&g
• 10” log screws
• Log seal gasket
• Window and door buck frames – 2×6 spruce
• 1×8 t&g, v-joint pine skirting

3. Windows and doors – Energy Star rated

• White P.V.C., 4-1/2” flush frame, Low-E argon thermal glass, insect screens.

• Steel insulated entrance systems. 4-5/8″ flush pine frame- white vinyl clad, Low-E argon thermal glass

• Sliding Patio doors. 5-3/4” pine flush frame, white vinyl clad exterior

4. Interior partition framing

• 2×4 (or 2×6 as required) spruce, plates & studs @ 16” o.c.

5. Second floor system (when applicable)

• Pine timber support posts
• Pine support beams
• Pine timber floor joists and wall tie beams
• Pine timber infill between joists
• 5/8″ t&g OSBsub-floor sheathing

6. Gable ends (and dormer walls when applicable)

• 2×6 spruce framing – plates and studs
• Lintel material- as required
• Insulated wall sheathing – R4
• House wrap – air barrier
• 1×8 tongue & groove v-joint pine siding

11. Interior Wall & Ceiling Covering

• ½” Drywall to cover all partition walls ,ceilings, exposed gable ends and dormer walls.
• 1×3 strapping as required
• 2×2 nailing strips for installation of drywall between second floor timber joists
• *and second floor when applicable

12. Interior Trim

• 1×4 pine baseboard, interior door casing, corner & ceiling trim
• 1×4 pine window jamb extensions
• 1×4 (sides & bottom) & 1×6 (top) window and door casing

13. Interior Doors

• Pre-hung, hollow core, embossed colonial doors
• Bi-pass sliding door hardware and matching doors (when appliable)
• Matching bifold doors (when applicable)

14. Fibreglass Insulation

• R-20 for gable ends, second floor exterior walls (when applicable) 
• R-40 for ceilings
• Styrofoam attic vents (when applicable)
• Approved vapor barrier for all insulated surfaces

15. Main Floor Covering

• 1×6 t&g pine flooring

16. Second Floor Covering

• 1×6 t&g pine flooring

1. Main floor system

• Adjustable steel posts
• Built up wood support beam
• 5-½” sill sealer gasket
• 2×6 pressure treated sill plate
• Open web wood I pre-engineered floor joist system
• 5/8″ t&g plywood sheathing
• Builder’s shims

2. Perimeter wall system

• 5-1/2″ sill gasket
• 8”x10” double tongue and groove machined pine logs
• 12” specialized log screws
• Log seal gasket
• Window and door buck frames – 2×8 spruce
• 1×8 t&g, v-joint pine skirting

3. Windows and doors – Energy Star rated

• Hybrid PVC casement style windows with extruded aluminum cladding.
• 5-5/8” flush frame, painted both sides. Triple pane, Low-E (1) Argon thermal glass.
• Stainless hardware, color matched insect screen frames & multi-point locks.
• Steel insulated entrance systems.
  1-7/16” x 6-5/8” pine flush frame, natural interior, aluminum clad exterior. 
• Triple pane low-e (1) argon tempered thermal glass & stainless steel hinges.
  Painted both sides
• Sliding patio doors. 6-5/8” pine frame, natural interior, aluminum clad exterior, aluminum sill, triple pane low-e (1) thermal glass, mortise handle painted

4. Interior partition framing

• 2×4 (or 2×6 as required) spruce, plates & studs @ 16” o.c.

5. Second floor system (when applicable)

• Pine timber support posts
• Pine support beams
• Pine timber floor joists and wall tie beams
• Pine timber infill between joists over carrier beam with dividing walls
• 5/8″ t&g plywood sheathing

11. Interior Wall & Ceiling Covering

• 1×6 or 1×8 tongue and groove pine to cover all ceilings, gable ends, interior division walls and exposed gable ends
• 2×2 nailing strips for installation of tongue and groove pine between second floor timber joists
• 1×3 spruce strapping for ceiling area of trusses

12. Interior Trim

• 1×4 pine baseboard, interior door casing, corner & ceiling trim
• 1×4 pine window jamb extensions
• 1×4 (sides & bottom) & 1×6 (top) window and door casing
• 1×4 pine at division wall and log wall junction

13. Interior Doors

• Pre-hung 5 panel doors (paintable)
• Bi-pass sliding door hardware and matching doors
• Matching bi-fold doors
• Pocket door frames

14. Fibreglass Insulation

• R-20 for gable ends, second floor exterior walls 
• R-63 insulation for flat ceilings
• R-40 for cathedral ceilings
• Styrofoam attic vents (when applicable)
• Approved vapor barrier for all insulated surfaces

15. Main Floor Covering

• 1×6 tongue and groove pine flooring

16. Second Floor Covering

• 1×6 tongue and groove pine flooring

17. Preservatives

• Sansin SDF exterior stain
• Sansin Boracol wood preservative anti fungy and rot

18. Balcony

• Sansin Purity glacier wall and ceiling finish (Satin)
• Sansin Purity Floor finish (Satin)