Hybrid Timberframe Kits

1. Main Floor System

• Adjustable steel tele-posts

• Built up wood support beam

• 5-½” sill sealer gasket

• 2×6 pressure treated sill plate

• Wood I pre-engineered floor joist system

• 5/8″ t&g OSB sub-floor sheathing

• Builders shims

• 1×8 t&g, v-joint pine skirting

2. Perimeter Wall System

• Prefabricated wall panels constructed of 2×6 framing @16” o.c., R-4 Insulated sheathing, air barrier, & 1×3 strapping. Openings prepared with appropriate lintels
• Additional framing, sheathing, air barrier and 1×3 strapping as required
• Canexel Ridgewood D5 siding (includes for subfloor rim cladding)
• All required accessories for Canexel installation included

3. Windows and Doors – Energy Star Rated

• White P.V.C., 5-5/8” frame c/w brickmold, Low-E argon thermal glass, insect screens.
• Steel insulated entrance systems. 1-3/16” x 6-5/8” pine frame-white vinyl clad c/w brickmold, low-e argon thermal glass, white slab
• Sliding patio doors. 6-5/8” pine frame- white vinyl clad exterior, c/w brickmold

4. Interior Partition Framing

• 2×4 (or 2×6 as required) spruce, plates & studs @ 16” o.c.

8. Soffit & Fascia

• Pre-finished vented aluminum soffit
• Pre-finished aluminum fascia
• J-trim
• Fasteners
• Aluminum flatstock for drip flashings, transition flashings and soffit boxes

9. Exterior Trim

• Aluminum outside corner posts
• Windows and doors have integrated p.v.c trim

10. Porch Roof System (when applicable to design)

• Support posts to deck level
• Support beam for trusses 
• Prefabricated engineered roof trusses or dimensional spruce rafters
• Matching finish to main roof
• Pre-finished vented aluminum soffit, fascia to match main roof
• 1×6 tongue and groove v-joint pine for ceiling

1. Main Floor System

• Adjustable steel tele-posts

• Built up wood support beam

• 5-½” sill sealer gasket

• 2×6 pressure treated sill plate

• Wood I pre-engineered floor joist system

• 5/8″ t&g OSB sub-floor sheathing

• Builders shims

• 1×8 t&g, v-joint pine skirting

2. Perimeter Wall System

• Prefabricated wall panels constructed of 2×6 framing @16” o.c., R-4 Insulated sheathing, air barrier, & 1×3 strapping. Openings prepared with appropriate lintels
• Additional framing, sheathing, air barrier and 1×3 strapping as required
• Canexel Ridgewood D5 siding (includes for subfloor rim cladding)
• All required accessories for Canexel installation included

3. Windows and Doors – Energy Star Rated

• White P.V.C., 5-5/8” frame c/w brickmold, Low-E argon thermal glass, insect screens.
• Steel insulated entrance systems. 1-3/16” x 6-5/8” pine frame-white vinyl clad c/w brickmold, low-e argon thermal glass, white slab
• Sliding patio doors. 6-5/8” pine frame- white vinyl clad exterior, c/w brickmold

4. Interior Partition Framing

• 2×4 (or 2×6 as required) spruce, plates & studs @ 16” o.c.

5. Second Floor System (when applicable)

• Pine timber support posts
• Pine timber ledger
• Fasteners for ledger
• Pine carrier beams
• Pine timber floor joists @ 32” o.c.
• Pine timber Wall tie beam
• Pine timber infill over carrier beam with dividing walls
• 5/8″ t&g OSBsub-floor sheathing

6. Gable Ends (and dormer walls when applicable)

• Prefabricated wall panels engineered gable truss
• Prefabricated wall panels
• Lintel material – as required
• Insulated wall sheathing – R4
• House wrap – air barrier
• 1×3 strapping
• Canexel Ridgewood D5 siding
• *and second floor walls when applicable

7. Roof System

• Prefabricated engineered roof system
• Structural beams and support posts as required
• Truss bracing material – as required
• In-fill and blocking
• ½” OSB sheathing
• Ice and water shield for eaves, valleys & roof to wall junctions
• Synthetic underlay membrane for balance of roof area
• BP Mystique shingles & Mont-Blanc capping
• Pre-finished steel flashings
• Pre-finished eaves starters
• Roof vents
• Sub-fascia – 2×6 spruce
•